Specification
| Item | Specification |
Appearance | Pale gray or pale yellow powder |
Heating loss,70+2℃,2h , %≤ | 1 |
Ignition residue, 900+25℃,2h, %≤ | 50 |
Residue on 150 μm sieve, %≤ | 1 |
Properties:
Plasticizer is nontoxic, partly fusing, nearly insoluble in water and most organic solvent. Stored stably in normal conditions.
Applications
Plasticizer is suitable for plastication of natural or synthetic rubber. It can be used in both open mill and interal mixer the optimal temperature is 50 to 80'c for cold mastication and 130 to 160C for hot mastication, It dose not influence the physical-mechanical properties and ageing resistance. Plasticizer SJ-103, corresponding to the product RENACIT D, is a type of high efficiency and energy saving products. It can reduce approximate 1/3 of milling time, so to save energy and improved the labor productivity greatly. The quality of this product has been tested and approved by the famous Dunlop Company (UK) and Pirelli Tire Company (Italy).
Adding method
1,to be added independently.
2,to be added together with accelerator such as M,DM.
3,when processing one step carbon black masterbatch, to be added in initial mixing stage.
Storage
Stored closely in a cool, dry, well-ventilated area. Avoid exposure to direct sunlight
Package
Packed In knitted bags with plastic inner, the net weight is 25kg per bag
Our factory
FAQ
Q7：Is this price your real price?
A：Yes, but the price is floating, i suggest you contact us before you place an order
Q4. How about your delivery time?
A: Usually within10 to 15 days after the receipt of your prepayment and L/C.
Q2. What is your terms of payment?
A: We accept T/T and L/C ,if your order is large we can consider 70% by L/C and 30% by T/T in advanced.
Q3. What is your terms of delivery?
A: FOB, CFR, CIF